0
  • No products in the cart.
Total:$0.00

Author: Philip Sanborn

Home > Articles posted by Philip Sanborn

09 May K3 OPOS Setup

Posted in by Philip Sanborn

If using USB, setup the standard K3 Windows driver, see this link for instructions. If you are using serial or Ethernet, skip this step. Download and install the K3 OPOS driver from this link. Open the OPOS POS Printer Configurator. Enter a name for the printer in the Logic device name field, or leave the default. Select K3 in the device model drop down. Select the proper port in the port type box, and then click configure. For USB, select the printer by name. For serial, select the COM port, and enter the proper settings for your port. For...

Read More

03 May K3 Wifi Setup

Posted in by Philip Sanborn

Download and install the PrinterSet software. Connect the K3 to your computer  and power on the printer Open the PrinterSet software and click on "LOAD" > "From DEVICE"  Select the type of connection you are using to connect the printer to your computer and click "OK". Wait while the configuration is read from your printer. From the list of the left, click on "Communication" under "Setup". Scroll down to find, IP Address, Subnet Mask, Default Gateway. Set each of these according to the network that your printer will be connected to. Change Wireless to Wi-Fi, type in your...

Read More

03 May K3 Driver Installation

Posted in by Philip Sanborn

Download the K3 driver package from the K3 product page. Ensure your printer is powered on, but not connected to your computer. For Ethernet or Wifi printers, make sure you have already configured the printer for your network. Open the zip file, and navigate to the Windows folder. Double click on DIW_K3_202.exe to run the installer. Click "Run" in the window that opens. When asked if you want to install the driver package, click "Yes". Select the language you would like to use for the installer. This does not affect the languages that the printer uses for printing. Click...

Read More

03 Apr Installing Chinese and Korean Languages on TP5 Pro Printer

Posted in by Philip Sanborn

The ION TP5 Pro printer will support Chinese or Korean printing, simply load the font file for the language you need following the instructions below.   Download the appropriate binary file. Chinese: https://px-download.s3.amazonaws.com/TP5_Chinese_Font.bin Korean: https://px-download.s3.amazonaws.com/TP5_Korean_Font.bin Open the configuration utility. Select the USB printer. Press the Download Fonts button. Press the button with 3 dots, navigate to the download location, select the binary file you downloaded above, and press the Download button. You should get a message that says it was successful once it’s done. Shut the computer down and turn it back on. Do not restart. Open the configuration utility back...

Read More